How can I link an MPLS VPN and an IPSec one? I know I terminate the IPSec on a VPN500x and route into a VLAN, but can I route an MPLS VPN into a VLAN, and if so, how?Andy Billington
How can I link an MPLS VPN and an IPSec one? I know I terminate the IPSec on a VPN500x and route into a VLAN, but can I route an MPLS VPN into a VLAN, and if so, how?Andy Billington
Hello All,I am trying to get a PIX515 and Checkpoint Firewall 1.0 to talk to each other through IPSEC, using DES, SHA and a pres-shared key. Anyone ever done this before? I am having problems even with the key, since Checkpoint takes hex values for t...
I'm having a lot of problems with our VPN's bouncing. This is a hub-spoke VPN topology. A VPN connection will drop and will not reinitiate until a "clear isa sa" or a "clear ipsec sa" is used. Many times I find that I must "clear int" and then bri...
I have TACACS+ setup on a linux box for authentication/authorization of VTY session on our core routers. I have the authentication part working, but the authrozation does not seem to control the cmd I wants each user/group to have. Does any one hav...
I have a typical customer case where i need to pass routing updates over VPN and have 3des encryption as well.The scenario:1- Five locations across the country . All five locations have Pix firewalls with VPN 3Des licences. 2.I also have spare 2600 s...
We have PIX515 firewall with outside and inside interface.We have Cisco VPN 5000 Access VPN client in one of our machines on the inside network. We are trying to access a VPN 5000 concentrator on the outside network. What are the ports that need to b...
Is it possible to use the VPN client 1.1 in a Proxy server (Wingate)? The tunnel terminator is a rouer 1720.
If I understand correctly, there is not a vpn client product which will run on the Windows 2000 OS. Is there one in the works? When will it be available? Where can I get a copy? Is there a Beta version?
Customer is requesting this setup. How do I congiure the VPN 3005 for this. The remote sitehas the PIX 506 and wants a tunnel to the VPN 3005.TIA
Hi,I am new to this VPN technology and i am tasked in my company to research about this.As a start, i have a PIX515 and planning to set this up for remote access VPN, that is a Win95/98 dialup machine to an ISP.My question is, show version in my PIX ...
We had a Atliga 3005 and few 56Kbps dialup users till now and everything was fine. Recently we configured few cablemodem users connecting to this VPN box and found out that sometimes each of these cablemodem users can hog bandwidth upto 1000 kbps.(Ne...
Our 80-user network has a full T-1 Internet connection protected by a PIX firewall running PIX ver. 5.1(2). We have about a dozen remote users connecting to the network using Cisco Secure VPN Client v 1.1. In most cases, it works acceptably well. How...
I have implemented Private Addressing scheme at the branch offices of my organisation. Now I need to be able to connect to each node in the branch offices through the internet using VPN. My idea is to configure each office as a seperate VLAN under th...
I am the systems admin for my company. We have need for our external sales reps to access our home network via the internet globally. A couple of months ago, I was reading documentation of Cisco routers and it appeared the 1720 was capable of standal...
I have just read in MCNS book, that the VPN 3005 should be placed behind the pix. Does everyone agree, it seem to make sense to me. Question, what do I need to allow through the PIX to allow theIPSEC to go thruogh it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-15-2024 02:55 AM | ||
08-13-2024 10:09 PM | ||
08-13-2024 01:46 AM | ||
08-12-2024 10:32 PM | ||
08-08-2024 05:51 PM |
User | Count |
---|---|
8 | |
7 | |
3 | |
1 | |
1 |