terminated vpn client

[bma]

Hi

We are using Concentrator 3015 and cisco vpn client 3.52 for remote office.

After change firewall to watchgard in the remote office, vpn client is terminated by concentrator after connection in short time. vpngroup idle time setup is 120 minutes. vpn client is running with NAT to pass firewall. Before change firewall, it's fine. Please help.

Thanks.

ben

[gfullage]

You might want to check with WatchGuard about this. Check to see if it has a connection timeout value. It sounds like you're doing IPSec over UDP (or maybe TCP), so check what UDP/TCP timeouts the Watchguard has. also check it's syslog to see if it's tearing down a connection when the VPN client gets disconnected, that should give you a reason why it's being torn down.