04-13-2021 03:38 AM
i have vpdn connection . pptp
my connection is good
this is my commands
aaa new-model
aaa authentication login telnet local
aaa authentication PPP default local
aaa authorization NETWORK default local
usernam vpn password vpn
vpdn enable
vpdn-group pptp
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 10
ip local pool vpn 192.168.1.120 192.168.1.125
interface Virtual-Template10
peer default ip address pool vpn
no keepalive
ppp encrypt mppe 128
ppp authentication ms-chap-v2
ip unnumbered FastEthernet0 // interfase
ip unnumbered
To whom the packet is sent by this interface FastEthernet0
how to join all interfaces in 1 tunnel or vlan
to gel access in all interfaces in my vpn
04-13-2021 04:11 AM
this is cloned from the virtual-template i.e.
there are virtual-interface build each time One remote router connect to this HQ router.
the virtual-interface config is copy from this virtual-template.
Note:-for the P2P ip address you know for P2P you can unnumbered one end.
04-13-2021 04:36 AM
Thank you ;
FastEthernet1
FastEthernet2
FastEthernet3
FastEthernet4
and i can use all in ip unnumbered
can i use tunnel or vlan to do it ?!
04-13-2021 04:40 AM
we use Loopback because it always UP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide