10-01-2008 03:06 AM - edited 02-21-2020 03:58 PM
Hi,
I have set up a Cisco 877w and it works fine for web access
VPN Client on my laptop connects through the 877w and authenticates to my remote work ASA5510 firewall.
Problem is after connecting to the ASA I cannot connect to anything to the internal work network (10.0.0.0/24), ping, RDP etc comes back with no response.
I have attached the config, can anyone tell me what I am missing, an access list maybe?
Thanks for your help
Chris
Solved! Go to Solution.
10-01-2008 10:09 AM
This router is doing PAT/NAT , blocking Ipsec.
Enable Nat traversal on the remote ASA.
isakmp nat-t or crypto isakmp nat-t
HTH
Saju
Pls rate helpful posts
10-01-2008 10:09 AM
This router is doing PAT/NAT , blocking Ipsec.
Enable Nat traversal on the remote ASA.
isakmp nat-t or crypto isakmp nat-t
HTH
Saju
Pls rate helpful posts
10-01-2008 10:14 AM
10-02-2008 12:13 AM
Fixed the issue, Many Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide