04-21-2010 04:18 AM
Hi all,
I bought my first device of Cisco, and now I want to create VPN from my router to another Cisco device.
I found manual how to do it: https://supportforums.cisco.com/thread/2012359?tstart=0
But in my router I do not have "isakmp", I have only 3 choices:
my-router(config)#crypto ?
ca Certification authority
key Long term key operations
pki Public Key components
my-router(config)#crypto
Can you give my some documentation how to do it?
my-router#sh ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1)
Cisco CISCO1941/K9 (revision 1.0) with 491520K/32768K bytes of memory.
Processor board ID FCZ141190AK
2 Gigabit Ethernet interfaces
Thanks.
Solved! Go to Solution.
04-21-2010 07:17 AM
Hi,
Cisco IOS Software Licensing and Packaging
• IP Base: This technology package is available as default.
• Data
• Security (SEC) or Security with No Payload Encryption (SEC-NPE)
04-21-2010 06:40 AM
Hello,
as I understand there are problems with licence.
Now I'm waiting answer from cisco seller.
04-21-2010 07:17 AM
Hi,
Cisco IOS Software Licensing and Packaging
• IP Base: This technology package is available as default.
• Data
• Security (SEC) or Security with No Payload Encryption (SEC-NPE)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide