Vpn into PIX 506

[srg]

I am looking for the best way to telnet to a PIX firewall (version 6.0) on the outside interface. I can make a connection to the PIX with the 3.0 VPN client, but I can't seem to get the access list right to allow a telnet session. Anyone have any tips on what type of access lists I need or maybe a better way to connect?

Thanks.

[bstremp]

You cannot telnet to the outside interface. If you must gain access from the outside, VPN to your internal network, then telnet to the inside interface.

[0sgruttadauria]

You can't telnet to the outside interface. However, if you install 6.0.1 with the PDM, you can securely browse to the PIX (using SSL) to manage it.

[dmurnin]

configure the pix for secure telnet and use a secure telnet client.

[2d-ruttino]

You may also telnet to the outside interface through your VPN tunnel. Look for "Securing Your Telnet Connection to the Outside Interface" at the following link.

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v53/ipsec/advanced.htm#26809

-Denao