09-25-2005 11:08 AM
Dear Support,
running on pix: debug crypto isakmp
show the error below:
[IKEv1]: IP = xxx.xxx.xxx.xxx, Header invalid, missing SA payload! (next payload = 4)
any suggestion?
Thanks for help.
09-26-2005 03:50 AM
hi
do keyin your full error message over here and find out what it gives i did give a try but i couldnt get any valid o/p may be invalid or missing parameters.
http://www.cisco.com/cgi-bin/Support/Errordecoder/index.cgi
regds
09-26-2005 03:59 AM
Thanks for your comment,
I solved the problem as:
I found that if you replace the PeerName with it IP address, than it works again!
isakmp key ******** address PeerName netmask 255.255.255.255
to:
tunnel-group PeerName type ipsec-l2l
tunnel-group PeerName ipsec-attributes
pre-shared-key *
Don't forget to replace the * with the real key.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide