01-18-2018 03:56 AM - edited 03-12-2019 04:55 AM
Hi to all ,
(schema of the network :
pcclient<---->routerc2851<---(70Mbit)--->internet<---300Mbit--->routerasr1000<---->serverFTP
The router cisco2851 is linked to internet with 70 Mbit\s of the bandwith. I tested the performance with pc client inside the lan of the router 2851 and the other side a server with service of FTP.
Test:
1) download with crypto 8.024.kbit
2) download w\o crypto 14.408 kbit
3) two download in the same time the interface public arrived (w\o crypto) 28.839kbit
The quesions are:
1) why does the single download not arriving to this performance (28.839Kbit) ? and what can I do?
2) why does not use all bandwith that we have (70Mbit)?
Thanks a lot for the time that dedicated to me..
ciao
01-18-2018 05:23 AM
01-18-2018 06:23 AM
thanks Mohammed,
I don't have the qos and the server not have limitation. I tested in local lan and I trasfered a file in 822.432 Kbit
sh crypto engine brief
crypto engine name: Virtual Private Network (VPN) Module
crypto engine type: hardware
State: Enabled
Location: onboard 0
Product Name: Onboard-VPN
FW Version: 01100200
Time running: 189698 seconds
Compression: Yes
DES: Yes
3 DES: Yes
AES CBC: Yes (128,192,256)
AES CNTR: No
Maximum buffer length: 4096
Maximum DH index: 0300
Maximum SA index: 0300
Maximum Flow index: 0600
Maximum RSA key size: 2048
crypto engine name: Cisco VPN Software Implementation
crypto engine type: software
serial number: 2B9355AA
crypto engine state: installed
crypto engine in slot: N/A
thanks
01-19-2018 09:15 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide