VPN "routing"

[regraxpto]

Hi.

Anyone knows if it is possible with an 1760 configured with two VPNs: One site-to-site and the other a remote access VPN, from a PC using the remote access VPN use the site-to-site VPN?

[spremkumar]

hi

This is very much possible with 1760 but for that you need to have compatible IOS code and necessary DRAM and FLASH to support the code.

Would suggest to check out this link to find out the ios code which can serve your purpose and also fit into the FLASH,DRAM which you have currently installed in your box..

http://tools.cisco.com/Support/Fusion/FusionHome.do

do find the link which has enough sample configs from where you can refer the config which can solve your purpose..

http://www.cisco.com/en/US/tech/tk583/tk372/tech_configuration_examples_list.html

regds

[jackko]

the example below outlines exactly what you need: http://www.cisco.com/en/US/partner/tech/tk583/tk372/technologies_configuration_example09186a00800ef7ba.shtml

attached are the configs copied directly from the example.