Hi,My problem is : To access ressources through the LAN I have to shut my VPN hardware module or I can't ping anything to the distant network..(The VPN connexion is established correctly and I can ping router interfaces)Is there a special command? Wh...
I am trying to setup a vpn connection using Cisco vpn client 4.6 and PIX 6.3. My problem is when I try to connect from the client, I get an error message says that “Unable to connect with the remote device" My pix outside is connect to a internet rou...
Hello,Does anyone have the basic config lines I need to input on a PIX to allow all IP addresses coming in over the Internet to form a VPN tunnel if they have the correct authentication? I want to use the Cisco VPN client to form the tunnel.Thanks i...
Hi,I have set up a Cisco PIX 515 with VPN access for clients from the Internet. My question is as follows:some of the people who will be using the VPN connection are consultants in their own fields of work and already have a Checkpoint VPN clients in...
Hi~I'd like to be able to set up my Cisco 831 as a VPN Server but for some reason I can't find any information on how to do this. Also, do I need to use the Cisco VPN Client software or can I just use the Windows VPN Client? Thanks!
Hello,I have a few hunderd PDAs that are running Pocket PC 2004. I need to secure their network connectivity through Cisco 3060 Concentartors. ButIPSec and PPTP are not suport for the Pocket PC. Also, Movian software is end of life.Would anyone know ...
Hi, due to organizational changes, we need to move VPN groups from one 3005 to others. How can I do this, when not knowing the presared key??I tried to manually copy the group password (preshared key) from the native config.-file from one 3005 to the...
I have a 506 pix connected to a cable modem. The pix does PAT for me from my public address (let's say 5.5.5.5)to my private address space on the inside (10.1.1.x). I want to be able to keep everything on the 10.1.1.x network and still use the VPN ...
while upgrading my laptop from 4.0.4 clinet to vpn 5000 client ( uninstalled thr first one and then install second one ) i got a message (ERROR: INITstep returned 'cannot find step.vxd')do you know how to overcome this issue. i think that the old one...
Hi All Could you help me with a issue I am having trying to set up a VPN using a pix 520 and Cisco VPN client basically I can authenticate to the pix and radius server but cannot connect to any machines on the local network.Do I need to setup ACLs (o...
Hi,i got the following msg every 5 to 10 seconds:*Mar 20 05:00:33.290 UTC: ISDN BR1/0 EVENT: service_queue_from_physical_layer: Recvd L1 prim 7 state is 1*Mar 20 05:00:33.290 UTC: ISDN BR1/0 EVENT: service_queue_from_physical_layer: Recvd L1 prim 1 s...
We have three offices that connect over VPN. From all three routers there seems to be a connection up and all but one office PC's can communicate. The office in question can be ping'ed from the main office router but the PC's can't. I'm not sure if t...
Hello. A client has a PIX 525, version 6.2(2), currently providing access to a mainframe via Cisco VPN client, with about 100 remote users. They also have partner companies that access the mainframe via leased lines.The leased lines are to be remove...
Hi,I have a CISCO 3640 router configured as RAS with DM-18 card. There are 2 BRI lines connected to the router.Remote users are complaining, they are unable to connect to RAS. They are complaining that its error no 619, port disconnected. Every 10 ti...
