02-23-2011 08:57 AM
Hello,
We have a Cisco PIX 515r and currently our users install the Cisco Client on their desktops/laptops and connect to our VPN.
Now I'm being told I need to set up a VPN tunnel for a remote IP phone. I have no idea what I need to do on the PIX for this! (am by no means an expert)...
Can anyone tell me how this can be done or direct me to a set of instructions on how to do this?
Thank you!
Solved! Go to Solution.
02-23-2011 10:43 AM
02-23-2011 09:03 AM
Hi,
The PIX can support both remote access IPsec or Site-to-Site IPsec tunnels simultaneosuly.
If you need to add another remote site (client), just connect it.
If you need to add a Site-to-Site tunnel, you need to configure a static crypto map peer with the VPN settings matching on the other end.
You can follow this example that shows a S2S to another IOS router:
http://www.cisco.com/en/US/products/ps5855/products_configuration_example09186a0080a9a7a3.shtml
If you're running a pre-7.x code, the configuration is different.
Hope it helps.
Federico.
02-23-2011 10:18 AM
Sorry..I should have added that we are running v6.x...how much different is the config? Can you shed some light?
Thank you for your reply/
02-23-2011 10:43 AM
Here you go:
http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/sit2site.html
Federico.
02-23-2011 11:31 AM
thank you so much!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide