01-08-2012 03:27 AM
Hi i have troubles with ipsec vpn on my router. When i connect with vpn client to work network i can access to the internet. But i can't log on my work switch cisco sfe2010 via http if i put the ipaddress in to the browser. Ping work fine when i ping the ip of the switch. When i connect vi vpn client i have same ip from subnet as switch. Thanks for your help.
Sent from Cisco Technical Support iPhone App
01-11-2012 09:25 AM
Hi Jakub,
Looks like you are using the VPN pool IP range which is same in LAN. If thats the case you should use diffrent IP range for VPN Pool .
Thanks
Ajay
01-11-2012 10:00 AM
Thanks for your reply. Yes a use same VPN pool for example 10.0.0.x/24 in ip address of switch and get 10.0.0.x/24 when i connect with VPN client. You think that will be work if I get for example ip address 10.0.1.x/24 when i connect with VPN client? Create VPN pool 10.0.0.1/24?
Sent from Cisco Technical Support iPhone App
01-11-2012 10:03 AM
Yes VPN pool range should be diffrent than being used in LAN. Changing that will solve your problem. Also just take care of NAT exempt.
Thanks
Ajay
01-11-2012 10:18 AM
Ok but i will be in different network. It is not a problem when switch will be in 10.0.0.x/24 network and my ipaddress will be 10.0.1.x/24?
Sent from Cisco Technical Support iPhone App
01-11-2012 10:22 AM
Thats not a problem .
01-11-2012 10:25 AM
ok thanks for your help I am novice in using cisco... I try your advice and reply
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide