10-02-2008 02:10 AM
Is there a way to view the group keys on a VPN3000 in clear text, either on the device or through 3rd party tools?
TIA,
Luke
Solved! Go to Solution.
10-02-2008 05:09 AM
Hello Luke,
I hope the below information helps.
Under Administration-->Access Rights -->Access Settings
Config File Encryption : check NONE , Then Apply.
---------------------------
The file can be viewed from following Tab
Administration ---> File Management
You will the config file and config backup file. There is very "view" button that you can click to view the file now.
** Snapshot from the Lab VPN3000 ***
[group 3]
name=Netpro
password=netpro
Regards,
Arul
** Please rate all helpful posts **
10-02-2008 05:09 AM
Hello Luke,
I hope the below information helps.
Under Administration-->Access Rights -->Access Settings
Config File Encryption : check NONE , Then Apply.
---------------------------
The file can be viewed from following Tab
Administration ---> File Management
You will the config file and config backup file. There is very "view" button that you can click to view the file now.
** Snapshot from the Lab VPN3000 ***
[group 3]
name=Netpro
password=netpro
Regards,
Arul
** Please rate all helpful posts **
10-02-2008 05:37 AM
Arul,
Thanks that's great.
Regards,
Luke
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide