VPN

Hi,I have a design question regarding IPSEC VPN redundancy.I'm using 2 pix515 (6.3.5) on the central site (with 1 ISP for each) and 1 ASA 5510 (7.2.4) on the remote site (1 ISP).The remote site establishes the tunnel to the main site on PIX1. If the ...

Dear Experts,I have set a site to site VPN in two ASA5510 Firewall.The setting of IKE, ENCRYPTION are the same. But don't know why I do some actions such as ping and telnet, the result also request timeout.Attached document shows two logs from the AS...

It seems like I can only assign 2 DNS servers to VPN clients using the "dns-server" command in config-group-policy? How do I go about assigning more than 2?what exactly does dns server-group do? Can I use that command to assign dns servers to vpn c...

Hi, I have successfully connected to a remote site using client from behind our asa, however we are unable to access any resouces over the tunnel. If we use same laptop, same config on an un firewalled cable modem connection, we are able to connect ...

Hi,My remote-access vpn is messed-up & doesnt work...current config on ASA as..===========================tunnel-group RVPNtun type ipsec-ratunnel-group RVPNtun general-attributes address-pool sslpool authentication-server-group RADIUStunnel-group RV...

when i try to establish a VPN lan-to-lan between asa and cisco router ios through a nat device .Vpn work fine if router start vpn but fail if asa start.Router logs give these errors :*Aug 27 07:11:09.945: ISAKMP:(0:961:SW:1): processing KE > payload....

I have an ASA running 8.0(3) with client anyconnect-win-2.2.0133-k9.pkg installed on Vista 64Bit. At present drive mappings to servers work fine but Distributed File System (DFS) mappings fail. Any idea on what needs to be configured to fix this iss...

Hi,My ASA has 3 outside interfaces and one inside interface. Two outside interfaces are configured for two ADSL connections (with IP SLA for redundancy). Other outside interface is confiured for static public ip address in order to terminate remote a...

Hi,I have two ASA 5510 with L2L VPN tunnel setup between them. The ASA at the headoffice has an Exchange server and a Linux Deban v4.0 with a website hosted on it.The hosts at the headoffice could access the URL for this web site hosted on the Linux ...

I am trying to do a vpn where the main site has a static ip, but the remote site does not. They do have a DNS automatic update at the remote site, where somehow a pc goes out and update the external DNS by reporting what the external ip address is. ...

When initially loading the client onto a MS Vista computer the system hung and required a reboot. Upon attempting to reload the client I received and Installer error 28000 telling me to remove the initial load. Unfortuneately this software does not s...

Hi all,I have a cisco pix 515e which i did a "sh ver" with the output as shown below. I would like to know how many remote vpn clients and site to site vpn can my device support. Should i look at IKE peers? Base on the below output, IKE peers show un...

HiI wish to setup a L2L between 2 ASA 5505. Both of them have a public ip address on outside interface and RFC1918 compliant address on the inside interface. I've followed the guidelines in this document: http://www.cisco.com/en/US/products/ps6120/pr...