cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
492
Views
2
Helpful
3
Replies

why pix 525 continuous reboot,How to solve it?

fifa02nmdch
Level 1
Level 1

My pix 525 firewall continuous reboot,

CISCO SYSTEMS PIX FIREWALL

Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73

Compiled by morlee

256 MB RAM

PCI Device Table.

Bus Dev Func VendID DevID Class Irq

00 00 00 8086 7192 Host Bridge

00 07 00 8086 7110 ISA Bridge

00 07 01 8086 7111 IDE Controller

00 07 02 8086 7112 Serial Bus 9

00 07 03 8086 7113 PCI Bridge

00 0D 00 8086 1209 Ethernet 11

00 0E 00 8086 1209 Ethernet 10

00 11 00 14E4 5823 Co-Processor 11

00 13 00 8086 1229 Ethernet 5

Cisco Secure PIX Firewall BIOS (4.2) #0: Mon Dec 31 08:34:35 PST 2001

Platform PIX-525

System Flash=E28F128J3 @ 0xfff00000

Use BREAK or ESC to interrupt flash boot.

Use SPACE to begin flash boot immediately.

Reading 1921536 bytes of image from flash.

################################################################################

##########################

256MB RAM

mcwa i82559 Ethernet at irq 11 MAC: 000e.8431.fe8f

mcwa i82559 Ethernet at irq 10 MAC: 000e.8431.fe8e

mcwa i82559 Ethernet at irq 5 MAC: 0002.b3ee.eed2

System Flash=E28F128J3 @ 0xfff00000

BIOS Flash=am29f400b @ 0xd8000

Crypto5823 (revision 0x1)

-----------------------------------------------------------------------

|| ||

|| ||

|||| ||||

..:||||||:..:||||||:..

c i s c o S y s t e m s

Private Internet eXchange

-----------------------------------------------------------------------

Cisco PIX Firewall

Cisco PIX Firewall Version 6.3(1)

Licensed Features:

Failover: Enabled

VPN-DES: Enabled

VPN-3DES-AES: Enabled

Maximum Interfaces: 8

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

IKE peers: Unlimited

This PIX has an Unrestricted (UR) license.

****************************** Warning *******************************

Compliance with U.S. Export Laws and Regulations - Encryption.

This product performs encryption and is regulated for export

by the U.S. Government.

This product is not authorized for use by persons located

outside the United States and Canada that do not have prior

approval from Cisco Systems, Inc. or the U.S. Government.

This product may not be exported outside the U.S. and Canada

either by physical or electronic means without PRIOR approval

of Cisco Systems, Inc. or the U.S. Government.

Persons outside the U.S. and Canada may not re-export, resell

or transfer this product by either physical or electronic means

without prior approval of Cisco Systems, Inc. or the U.S.

Government.

******************************* Warning *******************************

Copyright (c) 1996-2003 by Cisco Systems, Inc.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

........................

3 Replies 3

spremkumar
Level 9
Level 9

hi

did u try to change the ios or tried to add any new cards ?hope u havnt if yes do revert.

regds

I want to try to change the ios ,but current version is 6.3.1 .cd documentation has a file :pix631.bin .Can I change which ios version. more worry about that if I change other verison.Can I have a unilimited user(UR) ? such that

Failover: Enabled

VPN-DES: Enabled

VPN-3DES: Disabled

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

IKE peers: Unlimited

this might happen if your box dont have eneough memory or flash for the pix sw you are trying to install.

HTH