02-02-2005 05:47 PM
Hi, What command i need use to do work the aux port in a 3600, in order to atach a modem and manage it from ouside?
Thanks
Fabian
02-02-2005 07:03 PM
For a exec dialin in order to connect into the 3600 router:
line aux 0
modem inout
tranport in all
flowcontrol hardware
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml
Thanks, Mak
02-10-2005 10:10 PM
Hi,
After Connecting the modem to the auxillary port.
Please configure line aux 0(line 193) with configurations as below:
modem inout
transport input all
login local
Also assign data bits,stop bits,parity as applicable..
After completing this establish a Reverse Telnet to the modem connected through Auxillary Port.
Telnet IP_Address 2xxx where xxx will be the line number.
If ur not able to telnet to the modem using the line number, then connectivity between Router and Modem needs to be checked.
Do Revert for further queries.
Nirmal,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide