05-31-2010 02:14 AM
Hi
I have a VPN Connection open:
No. | Name | Status | Phase2 Enc/Auth | Local Group | Remote Group | Remote Gateway | Tunnel Test | Config. |
---|---|---|---|---|---|---|---|---|
1 | GoldenLine | Up | 3DES/SHA-1 | 192.168.0.1 / 255.255.255.0 | 192.168.1.1 / 255.255.255.0 | xxx.xxx.xxx.xxx | /vpn_summary.htm |
But now i cant see the PC's and Servers behind it.
Is there any problem with the firewall who could block that. or is something wrong with the vpn config.
Thanks in advance for your help.
05-31-2010 07:52 AM
Hi,
This is a Site-to-Site tunnel between a WRV4400N and which device on the other end?
Normally when the IPsec is up but there's no traffic flowing is because ESP is being blocked or there's a routing issue.
Which device handles the VPN termination on the 192.168.1.1 side?
Federico.
06-01-2010 01:18 AM
Hi Frederico
Many thanks for your interest in this thread. In the mean time i could solve the problem. I must admit, it wasn't the router. It was my server.
Now everything is working just fine.
Thanks again
Patrick
06-01-2010 07:20 AM
Great to hear that is working now Peter.
Thank you for letting me know.
Federico.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide