Iron Port P1 Interface

[lambay2000]

Hello Dears,

I m not able to access the Iron port P1 Interface by Http or Https  neither i can ping the interface, Is it some sort of security has to be disabled on the Iron port WSA appliance to access P1 port.

I m able to access the M1 interface but not able to acces the P1 ?? Pls suggest.

Thanks

[edadios]

Confirm that your network interface has activity lights appearing to show good network connectivity.

Confirm he P1 interface has a proper ip address and subnet mask.

If ping still fails, then try to connect a pc directly to it, and ensure they are in same sub-network, and see if you can then ping from pc to p1, or vice versa.

[hallvard.solem]

Take a look at the appliances config and see if you have routing back to the subnet your connecting from on the P1 interface.

[lambay2000]

Hello Dears,

It is pinging the directly connected interface but the web page is not opening even though it is directly connected, i m able to open the GUI through the management interface.

The LED's on P1 interface is 1 Amber and the other Green   BUT

The LED's on P2 Interface are both green and also on the management interface both are green.

Thanks