06-10-2024 12:05 PM - edited 06-11-2024 09:07 AM
Hello,
So I am trying to configure phone gateway we have at a location that is directly attached analog to a old paging system. Which activates on a #25. Right now in WebEx I have the gateway CUBE connected as trunk to WebEX with the DialCast 31110. I have created a voice translation rule in the gateway for 31110 to go to #25
voice translation-rule 202
rule 1 /^31110$/ /#25/
!
!
voice translation-profile TRANSLATE31110
translate called 202
I then created a Voip DialPeer as seen below
dial-peer voice 3 voip
description Paging-in-VOIP
translation-profile outgoing TRANSLATE31110
max-conn 250
answer-address 31110
session protocol sipv2
incoming uri request 200
voice-class codec 99
voice-class stun-usage 200
no voice-class sip localhost
dtmf-relay rtp-nte
srtp
no vad
!
Then I have a dial-peer pots that is set for destination-pattern #25
dial-peer voice 2 pots
destination-pattern #25
port 0/1/1
no sip-register
!
I have played around with changing called-party, answer-address ect... This configuration I atleast got better feedback with a No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1).
I'm a little rusty when it comes to configuring dial-peer expecially going to a FXO Pots line, the tips or suggestions would be greatly appreciated. I have also provided a bigger snippet of the error I recieved when I tried to dial the dialcast incase it helps.
Jun 10 14:49:24.423 EDT: //-1/FDA1F1EAA352/CCAPI/cc_api_call_setup_ind_common:
Interface=0x7FB9CDFDF8C8, Call Info(
Calling Number=182136,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=31110(TON=Unknown, NPI=Unknown),
Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE,
Incoming Dial-peer=3, Progress Indication=NULL(0), Calling IE Present=TRUE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=13427
Jun 10 14:49:24.423 EDT: //-1/FDA1F1EAA352/CCAPI/ccCheckClipClir:
In: Calling Number=182136(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
Jun 10 14:49:24.423 EDT: //-1/FDA1F1EAA352/CCAPI/ccCheckClipClir:
Out: Calling Number=182136(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
Jun 10 14:49:24.423 EDT: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Jun 10 14:49:24.423 EDT: :cc_get_feature_vsa malloc success
Jun 10 14:49:24.423 EDT: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Jun 10 14:49:24.423 EDT: cc_get_feature_vsa count is 1
Jun 10 14:49:24.423 EDT: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Jun 10 14:49:24.424 EDT: :FEATURE_VSA attributes are: feature_name:0,feature_time:140436022724940,feature_id:18
Jun 10 14:49:24.424 EDT: //13427/FDA1F1EAA352/CCAPI/cc_api_call_setup_ind_common:
Set Up Event Sent;
Call Info(Calling Number=182136(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=31110(TON=Unknown, NPI=Unknown))
Jun 10 14:49:24.424 EDT: //-1/FDA1F1EAA352/RXRULE/regxrule_stack_pop_RegXruleNumInfo: stack=0x7FB9DC4B4BD0; count=1
Jun 10 14:49:24.424 EDT: //-1/FDA1F1EAA352/RXRULE/regxrule_stack_pop_callinfo_internal: numinfo=0x7FB9DC50A9A8
Jun 10 14:49:24.424 EDT: //13427/FDA1F1EAA352/CCAPI/cc_process_call_setup_ind:
Event=0x7FB9CF419588
Jun 10 14:49:24.425 EDT: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
Try with the demoted called number 31110
Jun 10 14:49:24.425 EDT: //13427/FDA1F1EAA352/CCAPI/ccCallSetContext:
Context=0x7FB9C761AD68
Jun 10 14:49:24.425 EDT: //13427/FDA1F1EAA352/CCAPI/cc_process_call_setup_ind:
>>>>CCAPI handed cid 13427 with tag 3 to app "_ManagedAppProcess_Default"
Jun 10 14:49:24.425 EDT: //-1/FDA1F1EAA352/RXRULE/regxrule_stack_push_RegXruleNumInfo_internal: stack=0x7FB9DC4B4BD0; count=1
Jun 10 14:49:24.425 EDT: //13427/FDA1F1EAA352/CCAPI/ccCallProceeding:
Progress Indication=NULL(0)
Jun 10 14:49:24.425 EDT: //-1/FDA1F1EAA352/DPM/dpMatchPeersCore:
Calling Number=, Called Number=31110, Peer Info Type=DIALPEER_INFO_SPEECH
Jun 10 14:49:24.425 EDT: //-1/FDA1F1EAA352/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=31110
Jun 10 14:49:24.425 EDT: //-1/FDA1F1EAA352/DPM/dpMatchPeersCore:
Jun 10 14:49:24.426 EDT: Match Rule=DP_MATCH_DEST_SIP_USER; Called Number=31110
Jun 10 14:49:24.426 EDT: //-1/FDA1F1EAA352/DPM/dpMatchPeersCore:
No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)
Jun 10 14:49:24.426 EDT: //-1/FDA1F1EAA352/DPM/dpMatchSafModulePlugin:
dialstring=31110, saf_enabled=0, saf_dndb_lookup=1, dp_result=-1
Jun 10 14:49:24.426 EDT: //-1/FDA1F1EAA352/DPM/dpMatchPeersMoreArg:
Result=NO_MATCH(-1)
Jun 10 14:49:24.426 EDT: //-1/FDA1F1EAA352/DPM/dpMatchPeersCore:
Calling Number=, Called Number=31110, Peer Info Type=DIALPEER_INFO_SPEECH
Jun 10 14:49:24.426 EDT: //-1/FDA1F1EAA352/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=31110
Jun 10 14:49:24.426 EDT: //-1/FDA1F1EAA352/DPM/dpMatchPeersCore:
Jun 10 14:49:24.426 EDT: Match Rule=DP_MATCH_DEST_SIP_USER; Called Number=31110
Jun 10 14:49:24.426 EDT: //-1/FDA1F1EAA352/DPM/dpMatchPeersCore:
No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)
Jun 10 14:49:24.426 EDT: //-1/FDA1F1EAA352/DPM/dpMatchSafModulePlugin:
dialstring=31110, saf_enabled=0, saf_dndb_lookup=1, dp_result=-1
Jun 10 14:49:24.426 EDT: //-1/FDA1F1EAA352/DPM/dpMatchPeersMoreArg:
06-18-2024 05:59 AM - edited 06-18-2024 07:45 AM
@rtarson I would suggest running 'debug voice dialpeer' to see if the voice translation rule/profile is doing what you are expecting it to do. Let us know what you find and we can take a look.
I'd also like to see all of your dial-peers to see if there are any others interfering. When you post your config and your debug, please put the output in a text file and attach the text file to your post. Trying to read configs and debugs in the 'post window' can make it very difficult to parse.
Maren
06-17-2024 03:41 PM - edited 07-31-2024 12:38 PM
Have you figured it out? having kind of the same issue.
regards, mybakersfieldrealtor
07-31-2024 03:06 PM - edited 07-31-2024 03:08 PM
So this is what I have:
We use a Dukan system which the paging activates on *2. Now this may not be needed because webex now has tranlation in webex
voice translation-rule 202
rule 1 /^71114$/ /*2/
voice translation-profile TRANSLATE_OLDPOTS
translate called 202
dial-peer voice 2 pots
translation-profile outgoing TRANSLATE_OLDPOTS
destination-pattern 71114
port 0/1/1
no sip-register
!
dial-peer voice 3 voip
description Paging System
translation-profile outgoing TRANSLATE_OLDPOTS
max-conn 250
answer-address 71114
session protocol sipv2
incoming called-number 71114
incoming uri request 200
voice-class codec 99
voice-class stun-usage 200
no voice-class sip localhost
dtmf-relay rtp-nte
srtp
no vad
!port where you analog system is attached
voice-port 0/1/1
caller-id enable
07-31-2024 01:08 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide