11-23-2021 02:53 AM
Hi all,
I recently get into a strange behavior on my Webex client. On all inbound calls (either webex calls or "phone" calls via CallManager CSF Device) I get an "Inbound call" voice message in background on ringing state. In my opinion this behavior emerged after updating the client at Webex ver.41.11.0.20606. I check "Notifications" and "Calls" parameters on Webex client and "Organization Settings" on Control Hub with no result.
Someone else with this problem? Any hint to resolve?
Thank you all in advance.
Solved! Go to Solution.
11-30-2021 11:40 AM
Hello @c.fotia, I was not able to locate an ongoing issue matching the behavior you described here. Can you advise if this issue persists and if the problem is present for all Webex client users in your organization? This may require some TAC support but I would like to learn more about about the issue before making that recommendation if you have not already done so.
11-30-2021 11:40 AM
Hello @c.fotia, I was not able to locate an ongoing issue matching the behavior you described here. Can you advise if this issue persists and if the problem is present for all Webex client users in your organization? This may require some TAC support but I would like to learn more about about the issue before making that recommendation if you have not already done so.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide