08-11-2022 01:02 PM
Is there a way to turn on 'Provider MicrosoftTeams Compatibility Mode' on the SX10 and SX20? I've got it turned on for the Cisco Webex Room Kit Plus, Mini, and Boards, but I don't see the setting for the SX10 or SX20.
Thanks, KM
09-02-2022 08:40 AM
'Provider MicrosoftTeams Compatibility Mode' did not work on sx10 or 20
08-28-2022 08:24 PM
That particular setting was only recently introduced in RoomOS 10.15. It is not available in earlier RoomOS 10 versions, or in the CE9 releases that you need to use on the older SX series endpoints.
The setting itself is really only an option that should be applied temporarily for intermittent troubleshooting of Microsoft Teams calls using WebRTC. Cisco TAC can advise when to set this configuration. The recommendation is to leave it off.
Please remember to mark helpful responses and to set your question as answered if appropriate.
09-02-2022 06:44 AM
Hello there, could you kindly help me understand ,what is the purpose or use of this feature?
I have it on my Room 55 device but its set too off, does turning it on in anyway improve the quality of my Ms teams calls on the vtc endpoint?
Thank you.
Robert
09-06-2022 11:56 PM - edited 09-06-2022 11:58 PM
As per my previous reply (and the Admin Guides), the setting should be left as "Off" unless instructed to turn it on during troubleshooting with the Cisco TAC on WebRTC issues.
Please remember to mark helpful responses and to set your question as answered if appropriate.
08-11-2022 05:08 PM - edited 08-11-2022 05:08 PM
I don't think it works. I also think the device needs to be RoomOS 10 and higher which the SX10 and SX20 do not support.
Search for "SX"
https://roomos.cisco.com/print/ReleaseNotes/RoomOS_10
https://roomos.cisco.com/xapi/Configuration.WebRTC.Provider.MicrosoftTeams.CompatibilityMode/
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide