cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
430
Views
5
Helpful
1
Replies

Webex obj start_time accuracy

jozanini
Cisco Employee
Cisco Employee
how accurate is the following data?
 
1. Meeting.start —> to when meeting starts
2. Transcription.statTime —> to when transcription is created and accordingly the offsetMillisecond mentioned in the transcription snippet.
3. Recording.timeRecorded —> to when recording has started.
 
So far What we have noticed is Recording.timeRecorded is 1 sec behind from what the actual recording suggests while for Transcription.statTime is 2-3 sec.
1 Accepted Solution

Raffaele Lagana
Cisco Employee
Cisco Employee

For all the above we always recommend going to the nearest minute. We do provide the seconds too, but as you have already figured out, it may not be accurate to the second. The services that record this information might have a second or two delay to actually write this to the DB as there are a number of backend services that get hit, before final write occurs.

View solution in original post

1 Reply 1

Raffaele Lagana
Cisco Employee
Cisco Employee

For all the above we always recommend going to the nearest minute. We do provide the seconds too, but as you have already figured out, it may not be accurate to the second. The services that record this information might have a second or two delay to actually write this to the DB as there are a number of backend services that get hit, before final write occurs.