02-27-2018 04:22 AM - edited 07-05-2021 08:18 AM
I have uploaded the License-file to the SSO-cluster (WLC5508), but I am unable to activate it (see encl). It's the primary node that is active, and I have rebooted the cluster. Also, the Licenses are not identical on the secondary node (see encl). Please advise.
02-27-2018 04:41 AM
Hi @bvj197222
What is missing on the secondary is that one you didn´t activated yet. To do that, go to the MANAGEMENT tab, license, click on the license you need to activate and "License Status " change the status.
After that, reboot the WLC and you should see this on both WLC.
-If I helped you somehow, please, rate it as useful.-
02-27-2018 04:51 AM
The problem is that the 100 License that I'm unable to activate on the primary is activated on the secondary (see encl). When I switch over to primary then the 100 shows as inactive, and there's no way to activate it. Also, as you can see, the 150 License on the primary is not shown on the secondary when I switch over.
02-27-2018 05:10 AM
From your first print there was no 100 license on secondary. And on primary it was inactive.
This print you send now, it is not possible to see which one it is.
But, as I said, to activate the license, change the license status and accept the eula.
-If I helped you somehow, please, rate it as useful.-
02-27-2018 05:17 AM
Problem solved. It was the wrong License-type. License can only be activated and installed on the primary. I got a New License from Cisco.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide