View PSKs in wlans of WLC

[dwtcp]

Hi all,

i want to add a second controller to an existing one.

So, i have to build the same wlans with the same ssids and PSKs.

How can i view (or copy without having to view them) the PSKs stored in the first WLC in order to use them in the second also?

BR

Anthony

[George Stefanick · Accepted solution]

Hello dwtcp,

There is no way to view the PSK keys on the WLC. (Just added info) had you used WEP you could.

The best way to do this IMHO is to copy the config from your original WLC and add it to the new WLC. Just remember to change the mobility groups and interfaces.

btw -- what model is your old wlc and new wlc

[dwtcp]

Hi George, it is 4404 integraded in 3750G.

Does this change anything?

How would i do this if i had wep?

[George Stefanick]

So its 2 4404s then ?

Here is the info on the wep

https://supportforums.cisco.com/community/netpro/wireless-mobility/begin-wireless/blog/2011/11/04/recover-wepadminguest-account-password-from-wlc

[dwtcp]

Hi George,

i can't really access this webpage.

I am getting to a page saying i don't have permissions.

"It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake."

[Scott Fella]

Try this link:

https://supportforums.cisco.com/docs/DOC-19663

[dwtcp]

Thanks George,

this link works fine!

BR

Anthony

[chrisgapske2]

Cisco has deemed you unworthy . So you have to store the password somewhere else that could be compromised.  Sorry but stupidly once it goes in it does not come out.