03-14-2016 09:47 AM - edited 07-05-2021 04:46 AM
Hi All,
Am I doing wrong or is there some software problem not sure.
We are trying to join Cisco 1700 LWAP with Cisco WLC 5520 8.1.110. and getting following error
*Mar 14 05:32:54.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.17.x.x:5246
*Mar 14 05:32:54.999: %LWAPP-3-CLIENTERRORLOG: Load nvram:/lwapp_ap.cfg config failed, trying backup...
*Mar 14 05:32:54.999: %LWAPP-3-CLIENTERRORLOG: Load nvram:/lwapp_ap.cfg.bak config failed...
*Mar 14 05:32:54.999: spamInitRadCfg: recovery image default mode 0
*Mar 14 05:32:55.011: %LWAPP-3-CLIENTERRORLOG: Load nvram:/lwapp_ap.cfg config failed, trying backup...
*Mar 14 05:32:55.015: %LWAPP-3-CLIENTERRORLOG: Load nvram:/lwapp_ap.cfg.bak config failed...
We are able to ping WLC, DNS from AP and did CISCO-CAPWAP-CONTROLLER entry in DNS server with WLC management IP.
Can anyone knows what I am doing mistake.
Thanks
Kamlesh
03-14-2016 01:13 PM
8.1.110 has been withdrawn by Cisco. Any chance you can upgrade to something else, like 8.1.131.0 or 8.2.100.0?
This is a troubleshooting guide for access points not joining.
Try (form the console) manually joining the AP to the controller.
"debug lwapp console cli"
or
"debug capwap console cli"
lwapp ap controller ip address <IP-address>
03-18-2016 12:59 AM
Hi Philip, Thanks,
It was due to Nexus vPC misconfiguration portchannel.
Thanks
03-14-2016 06:46 PM
Loading the image has failed, try to upgrade if possible.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide