09-12-2012 09:36 AM - edited 07-03-2021 10:39 PM
We are decommisioning a big site and we are looking at having to default the configs on about 40-50 ap's. Other than manually logging into each ap via the controllers and defaulting them is there an easy way to default a bunch of them at once via either the controller or we have WCS at our disposal. So far have not found a way in WCS to do this , you default controllers easy enough but haven't found a way via WCS to do mass ap's though I could be missing something obvious.
09-12-2012 09:43 AM
WCS doesn't have that feature. Or you can create a simple script and use the CLI:
clear ap config
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-12-2012 09:43 AM
If you console into the ap and delete private config
If you log into the controller you can delete the ap config by selecting the ap and hitting the clear all config button on the right
I suspect you can do a WCS template for this as well, dont have WCS in front of me to check
Hope this helps
__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
09-12-2012 09:49 AM
Just double checked... no love on WCS ...
__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
09-12-2012 09:51 AM
That would be bad in case you had a disgruntled employee
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-12-2012 09:57 AM
Disgruntled employees, huh who has any of those ! Oh, you must mean Leo or Steve ..
LOL
__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
09-12-2012 09:51 AM
pull the names of the AP either out of WCS or the WLC. then create a text file
clear ap config < AP Name>
rinse, repeast for all the AP, then paste into the CLI of the WLC. Or use the WLC to push this as a CLI template.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
09-12-2012 09:56 AM
Yeah that might work , in WCS I can make a CLI template with all the entries and just run it against the controller ,
clear ap config 1
clear ap config 2
etc....
Thanks...
09-12-2012 10:47 AM
Yup those two!
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide