10-15-2020 08:55 AM - edited 07-05-2021 12:39 PM
Hello Experts,
Do we have any means to determine the wireless interference from the wireless PCAPS?
The QBSS Load Element in the Beacons reflects other useful information but not the interference.
Not sure if any field in wireless pcaps can help us obtain the same?
Solved! Go to Solution.
10-15-2020 10:37 PM
Hi former colleague,
There is no way of determine tehre is interference from any element of the header but only utilization.
In order to find if there is interference in the neighboourhood the only way to do it is using a spectrum analyzer like Metageek's Chanalizer or Ekahau's Sidekick among others.
HTH
-Jesus
*** Please Rate Helpful Responses ***
10-15-2020 10:37 PM
Hi former colleague,
There is no way of determine tehre is interference from any element of the header but only utilization.
In order to find if there is interference in the neighboourhood the only way to do it is using a spectrum analyzer like Metageek's Chanalizer or Ekahau's Sidekick among others.
HTH
-Jesus
*** Please Rate Helpful Responses ***
10-15-2020 11:07 PM
Hello Jesus,
Glad to see your response
Thank you it cleared my query.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide