11-15-2012 03:16 PM - edited 07-03-2021 11:03 PM
Hi,
I have a Cisco Wireless LAN Controller AIR-CT5508-K9 running Software Version 7.0.98.218. This WLC has registered ten AP model 1240.
Now I have configured fiive CAP3502 with static capwapp commands, when I connect the CAP-3502 in the network, in the WLC I see the status "downloading" then the CAP restart, and the console show the message *Mar 1 00:15:39.033: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER, and never the CAP3502 is registered in the WLC.
Information about the CAP3502 (show version)
Model: AIR-CAP3502I-A-K9
Cisco IOS Software, C3500 Software (AP3G1-K9W8-M), Version 12.4(23c)JZ, RELEASE SOFTWARE (fc1)
System image file is "flash:/ap3g1-k9w8-mx.124-23c.JZ/ap3
LWAPP image version 7.0.98.218
Information about the WLC:
Model: AIR-CT5508-K9
Software Version: 7.0.98.218
You have suggestions?
Solved! Go to Solution.
11-15-2012 03:29 PM
Take a look at the compatibility matrix. 7.0.98.x is not supported by the 3500's. you need to upgrade to 7.0.116.0 or newer.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp81600
Sent from Cisco Technical Support iPhone App
11-15-2012 03:29 PM
Take a look at the compatibility matrix. 7.0.98.x is not supported by the 3500's. you need to upgrade to 7.0.116.0 or newer.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp81600
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide