I have a quick question for the forum members. I am building a network with lots of guest traffic. I would like to have a captive portal layer 3 security with a customized website loaded on the 9800-40 for guest user Authentication.
I am searching for limitations of the number of connections / traffic that the captive portal / controller can handle and I am not able to find anything.
My environment should be able to handle 10,000 requests for guest users. Has anyone come across any issues with hosting the customized captive portal on the WLAN controller? (9800-40).
I am not using on my architecture a separate DMZ WLAN controller. I simply have 2 9800-40's in HA mode.
Any help recommendation would be sincerely appreciated.
IntroductionFeatured ExpertQ: Does switch port support uplink the mac-sec link?Q: Will the older 16.10/16.12 IOS XE SD-WAN (stand-alone) images be maintained for a specific amount of time going forward? Will these stand-alone code branches receive mainten...
This is a two-step process.
Step 1: Need to add the FlexConnect AP to a FlexConnect Group.Step 2: Need to configure a FlexConnect ACL (to specify the local traffic-of-interest), and map it to that FlexConnect Group.
For step 1----------As in the i...
Hello , We faced issues with Cisco AnyConnect when trying to connect at home network. we have 2 scenarioScenario 1: one home network and Cisco AnyConnect gives "limited or no connectivity" error messageScenario 2: multiple networks and Cisco An...
Hello, We're running WLC 9800-40 with version 16.12.2t with SFP-10G-LR-S. I have some questions regarding SFP-10G-LR-S:1. Is this model supported by Cisco? If not Which model do you recommend for WLC9800-40?2. Would SFP-10G-LR-S cause issues with upg...
Hello, I just received my new 240ac access point!I tried to configure it twice now but each time I set the IP to be static I can wait more than an hour and it is still flashing 3 colors. Last time I lost my patience and after 30min I reset...