CISCO CBW140AC

[PauloGomes23234]

Please, I don't have a POE switch, I need to hook up a CBW140AC using an RJ45 to POE adapter,
I need to know what voltage this adapter needs. Could someone please pass some information?

[Kasun Bandara]

Hi,

APs power draw is as below. you need to supply that power from injector. normal PoE injector will do the work. you cannot use power adapters for this AP.

https://www.cisco.com/c/en/us/products/collateral/wireless/business-100-series-access-points/smb-01-bus-140ac-ap-ds-cte-en.html

Power draw

●  8.3W (maximum, on PoE)