problem with vlan on WAP4410N Wireless-N .

[changbietgi]

my company network have a swith core with many vlans. example Vlan 50 for employ and vlan 75 for visitor. And now i want to config wap4410N with 2 SSID mat 2 VLANS (VLAN 50 math with SSID1 and VLAN75 math with SSID2). but i can't do it. I can create 2 SSID but when i tag vlan, user can't connect internet and can't ping gateway . I connected wap4410N with swith core. Please help me create 2 VLANs math 2 SSID to user can connect internet ! thanks !

[AutomatixSpzoo]

The WAP4410N is very unstable in the configuration with few VLAN and SSID.

First of all, you have to set proper VLAN port configuration on the switch.

AWa.

[changbietgi]

I have configured switch core with many vlan and my network running very good with sw layer 2 for 400 user. But now, i want to connect Access Point WAP4410N to Switch core to have 2 SSID with 2 different VLAN to user and visitor. Who has done. Plesea help me to do this ! thanks !

[AutomatixSpzoo]

Switch off SSID and network isolation.

AWa.

[changbietgi]

I don't under stand your anser. now i want to 2 SSID match 2 VLAN ex: CG-HH1 as VLAN50 and CG-Visitor VLAN75. and user use connect to 2 SSID can access internet. Please help me !