04-21-2010 06:19 AM - edited 07-03-2021 06:44 PM
We have 3 1130's installed and 2 vlans, one public and one private. I need to broadcast my private SSID but cannot find the setting to allow this. Can someone advise me on the location of the setting?
chaz
04-21-2010 06:43 AM
Charles,
I assume you are using IOS (Autonomous) Access points.. if so you need to enable guest-mode on the Dot11 SSID
so it would look something like this
dot11 ssid private
vlan x
guest-mode
Hope this helps.. Please feel free to rate it.
04-21-2010 07:28 AM
Forgive my response/confusion but in using the web interface, where is this setting held?
04-21-2010 06:53 PM
It should be under Security -> SSID towards the bottom of the page you will need to scroll the select Guest ID and the SSID you want broadcast.
Bill
04-21-2010 06:55 PM
Dumb follow up, but the device cant broadcast both SSID's?
04-21-2010 07:30 PM
Yes, you can broadcast up to 16 SSID.
04-21-2010 07:34 PM
I can get one or the other to broadcast but not both. What am I doing incorrect?
04-21-2010 07:37 PM
Go to Security > SSID Manager. Highlight the SSID you want and go down and tick "Set SSID as Guest Mode".
04-21-2010 08:36 PM
Don't forget to rate our posts. Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide