02-08-2008 05:39 AM - edited 07-03-2021 03:21 PM
I am setting up a 1200 AP. If you go to >Network Interfaces >Radio0-802.11g >Settings, there is a setting for "External Antenna Configuration". I am using an external Hi-gain antenna. Do I set this to enabled? And if yes, it doesn't want to accept the dbi setting even though it seems to me to be within the accepted range. Any assistance is appreciated.
Solved! Go to Solution.
02-08-2008 07:25 AM
Hi Johnny,
In AP mode this is not a requirement. My understanding of this setting is that it comes into play in Bridge or WGB modes.
Hope this helps!
Rob
02-08-2008 07:25 AM
Hi Johnny,
In AP mode this is not a requirement. My understanding of this setting is that it comes into play in Bridge or WGB modes.
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide