I have a working 1200 Access Point, that uses 802.1x PEAP authentication back to an ACS. I want to enable 802.1x on the switch interface the AP connects to,
dot1x port-control auto
When enabled the dot1x stays unauthorized and debuging doesn't show EAPOL packets being passed on?
The switch will work itself with laptop machines wired directly to it (using PEAP), and authorises back to ACS.
I can not confirm what the switch configuration would need to be to enable the wireless EAPOL packets to pass through, or enable the wireless AP1200 to be an eap client to the switch but still a server to the wireless clients?
We are pleased to announce the immediate availability of the IOS-XE release 17.4.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link:
Securing devices without 802.1X
PSK (Pre-Shared-Key) WLAN is widely used for consumer & enterprise IoT onboarding as most of IoT device doesn’t support 802.1X. While PSK WLAN provides an easy way to onboard IoT, it also introduces challenges as...
Due to the certificate expiration, any new Control and Provisioning of Wireless Access Points (CAPWAP) or Light Weight Access Point Protocol (LWAPP) connection will fail to establish. The main feature that is affected will be the Acce...