1231 WGB connecting to 1000 Series LWAPP AP

[c.fuller]

Can I configure a 1231 autonomous access-point as a WGB and have it connect to our infrastructure 1030 Series infrastructure APs. I need to get some clients with only ethernet NICs onto our wifi network.

If not, anyone have any other ideas short of replacing 1030s.

Thanks

Chuck

[Stephen Rodriguez]

This should work with Universal Work Group Bridge mode. In uWGB you specify the MAC address of the connected device, so it looks like the end device is directly connected to the wireless.

the following doc should help, just need to add the keyword universal and the MAC after station-role workgroup bridge.

http://cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43hot.html

HTH,

Steve