Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
On an autonomous 1131, what is the effect of not having antenna gain set to 0?interface Dot11Radio0 no ip address no ip route-cache ! encryption mode ciphers tkip ! encryption vlan 1 mode ciphers aes-ccm tkip ! ssid Private ! ssid Public ! mbssid spe...
Hello,I am looking for solution to replace our current enterprise wireless with Cisco. Does Cisco have a Hardware Compatible List (list of all wifeless devices work best with Cisco controller and thin APs) Regards,
I have an existing site with 5 1240AG Access points and have never had any problem; a few months ago we added 2 more to the existing building and still had no problems.. then a few weeks ago we added an additional building connected via Fiber and add...
Hello allI am trying to configure the the PA for guest and secure local access. I am unsure on how to accomplish this on the AP541N Dual Band Single Radio AP. Is there a document out there.This is what I would like to doGuess comes in and be able to ...
Dear all,I would very much appreciate if someone could assist me with my HomeLab setup. Currently, I have ordered one Cisco 871W wireless device and looking forward to other network component/s that support Cisco 871W to create a complete HomeLab. Th...
I can not get dhcp to hand out address over the wireless. the LAN works just fine.hear is the config for the AP and the router. This is a 881w router with the integrated AP
Hy,we are playing around with the Rogue AP Detection at the moment. For this we have setup a test scenario where we have a Rogue AP connected to our network using WPA2 PSK and several clients connected to it.What can cause that a AP sees the Rogue AP...
Hello!Has anyone a standard config to this?I have 2 vlans(inside and outside) on a Cisco asa, the AP is connected to the ASA, I want 2 SSID on the AP(inside and outside).Thanks!
I'm looking into an RFID solution for a customer who wants to tag a warehouse full of objects and would like to be able to locate them in 3D space, so they know which shelf they're sitting on, aisle etc. Is this possible, and if so can i implement i...
Hello,I have problem med wireless authentication.Have tried following Operative system on clients. Windows XP, Windows Vista and Windows 7.Radius Server is working normally.Under here is debug, version and configuration. Kan somebody se something wro...
We are having an issue with a Fujitsu tablet using a Atheros 928x wireless NIC. At random times it just stops passing traffic, it stays connected to the access point, but just stops passing any traffic like the connection has gone away. I have trie...
HiWe are here trying to connect two sites over wireless bridge:Site A has a switch, wireless controller and LAP1252.Site B has a switch and workgroup LAP1252.Now, both access points are communicating successfully, and from site B, I can reach the con...
Hi everyone,This is my scenario:Customer using WLC as hotspot for guest SSID which authentication is local.If I create user accounts the following hapens: User1 can be used by many users and they need an account per user due to security and BW reason...
Hi to all,Could someone please tell me the differences between these two AP families (Aironet 1140 vs Aironet1040) ? I've seen that the LAP version of the 1040 doesn't support the feature Extended Coverage..what is this feature about? Antenna specifi...
Hi,I just bought AIR-LAP1131AG. Unfortunately, i want autonomous mode and not lightweight.So, is there any procedure to convert in "AIR-AP1131AG" ?Thanks.
