1240AG as WDS & Local Radius Server

[pirion]

Have 5 1240AG's and want to use one as WDS and Local Radius Server.

Am using the following as a guide:

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c951f.shtml#hw

The above example uses a Cisco Secure ACS and designates both an AP and a WSLM as the WDS. I just want to use the AP as the WDS.

Isn't it possible to do the whole thing just using a 1240AG as both the WDS and Local Radius Server and not use a Cisco Secure ACS or WSLM?

Is there an online guide for such a thing? (looked, didn't find it)

Appreciate the guidance

Cheers

[dancampb]

Sure, just make sure you use port 1812 for your radius auths. Here's an example of setting up the local Radius server:

http://www.cisco.com/en/US/partner/products/hw/wireless/ps4570/products_configuration_example09186a00801c0912.shtml

And here's the guide for setting up WDS:

http://cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43roamg.html#wp1051791

[pirion]

Thanks, that's what I thought.

I had found the WDS setup link but wasn't sure if I was missing something.

The link you provided for the Local Radius Server setup is for "partners" only I believe? Can't access it.

But I think I should be able to find some guides/examples somewhere else in the archives. I'm starting w/ these 2 links;

https://www.cisco.com/en/US/products/ps6521/prod_configuration_examples_list.html

and

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c0912.shtml

Appreciated the heads up about port 1812.