1310 bridge upgrade to 12.3(2)JA

[kodanig]

Hi, I've upgraded 8 1310 bridges from 12.2(15)JA to 12.3(2)JA using the following CLI command: "archive download-sw /overwrte /reload tftp://xx.xx.xx.xx/c1310-k9w7-tar.123-2.JA2.tar". The upgrades seem to work fine, however, when I do a "show ver" and in the web interface all of the bridges are reporting software version 12.3(2)JA and bootloader version 12.2(15)JA. Shouldn't the bootloader version match the system software version or did I miss running an additional cli command.

Thanks

[thisisshanky]

Boot loader versions can be different from the IOS and neednt match exactly. For ex: see the sh version output of an AP that has not been upgraded yet.

Cisco Internetwork Operating System Software

IOS (tm) C1100 Software (C1100-K9W7-M), Version 12.2(8)JA, EARLY DEPLOYMENT REL

ASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Wed 12-Feb-03 15:22 by hqluong

Image text-base: 0x00003000, data-base: 0x00495088

ROM: Bootstrap program is C1100 boot loader

BOOTLDR: C1100 Boot Loader (C1100-BOOT-M) Version 12.2(4)JA, EARLY DEPLOYMENT R

LEASE SOFTWARE (fc1)

TestAP uptime is 13 weeks, 4 days, 2 hours, 21 minutes

System returned to ROM by power-on

System image file is "flash:/c1100-k9w7-mx.122-8.JA/c1100-k9w7-mx.122-8.JA"