1400 antenna azimuth plot

[jwarner]

The AIR-BR1410A-A-K9 has a built in 22.5 dB antenna. While I can find azimuth plots for all the external antennas sold as separate products for the bridge with an N connector, I can't find anything for the built-in patch array on the integrated model. I expect to be asked by the forces for voluntary frequency coordination what lobes hang off the antenna center line. Does anyone know where I can find the azimuth plot for the built-in antenna?

[ebreniz]

Try whether this can help you.

http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008008883b.html

http://www.cisco.com/en/US/products/hw/wireless/ps5279/products_data_sheet09186a008018495c.html

[jwarner]

The first data sheet has a polar plot of antenna sensitivity for every antenna EXCEPT the 22.5 dB built-in. I've been asked whether there are side lobes to the radiation pattern. I don't know how to answer that without a polar plot.

The data sheet for the radios contains no polar or azimuthal radiation information at all.

Thanks

[gillins]

I had the same question and had to open a tac case to get the information. I am attaching the the information that you need.

hope this helps

scott