1524 Powering On

[clarkr]

Have a 1524 that will be used as a MAP and will connect to 1 RAP.  Just the 2 APs on the controller.  The RAP powers on fine but the one that I am using as a MAP will not power on unless I hook a computer to it to or into my network.  It will only power on if it has a wired network connection?  I am hooking 2 cameras to the MAP and shooting that back to my RAP.  How do I power it on?

[Scott Fella]

Rick,

Make sure the camera is connected to the PoE out and not in the PoE in.  How are you powering up the RAP and MAP anyways.  Here are some links that might help:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a0080b02511.shtml

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808e9c1b.shtml