05-23-2019 07:11 PM - edited 07-05-2021 10:27 AM
I am configuring a 1562I as a Mobility Express AP and when I am configuring the 5GHz radio I noticed that when configured for channel 36 my power options are levels 1 through 5. If I choose channel 157 the power level options are 1 through 7.
Does anyone know what these levels equate to in terms of dBm or mW?
Thanks
05-24-2019 12:05 AM
You have to refer below document highlighted. Pick right regulatory domain when you go through the spreadsheet
HTH
Rasika
*** Pls rate all useful responses ***
05-28-2019 11:18 AM
Thank you for the information but it still leaves some questions. For example, I assume that since I am using an internal antenna model that this would count as a "Triple Antenna" model. Then I would assume since I am not limiting any data rates that I should look at the HT/VHT20 table since I have the radio set for a single 20MHz channel. If that is the case then for channel 36 on a -B unit the max power would appear be 14dBm. If that is the case then power level 1 should be 14dBm and power level 5, the lowest option, should be 3dBm. But if the integrated antenna model is considered a single antenna then the transmit power level could be as high as 16dBm.
The problem with the table is that if I am using HT/VHT20 in channel 157 my max power would appear to be 17dBm. If that is the case and power level 1 is 17dBm, then what is power level 7? By my calculation it would be -1dBm. Is that right?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide