1572EAC Console Connection

[deanrobertson1]

I have 2 1572EAC APs and can not connect to the devices via the console port.

I have check the com port setting and the cable and have tested the connection to both a 1552 AP and a switch using the same cable without issues.

Is there any special setting for the serial connection to the console port on the 1572EAC

Speed 9600

Data Bits 8

Stop bits 1

Parity None

Flow XON/XOFF

[cmonks119]

For anyone with this issue, I thought I had the same issue as well, but I just noticed I was using the wrong port. This AP has two RJ-45 ports, one labeled Console, the other Serial. Of course I was on the Serial port and it wasn't working. Moving to the Console port worked as expected. 

[Andrew Beecher Njagi]

In my case i was using serial console, I later used normal cisco console cable rj45-to-db9 console cable with hyper terminal and i was able to connect into the Access Point