06-28-2012 11:25 AM - edited 07-03-2021 10:21 PM
Hi all,
I have 1811w router and i need to config that for home wi fi.
IT has 2 interfaces
Router#sh ip int brief
Interface IP-Address OK? Method Status Prot
ocol
Async1 unassigned YES unset down down
Dot11Radio0 unassigned YES unset up up
Dot11Radio1 unassigned YES unset ad
Need to know what should i config on Do1 radio for wi fi config?
Can i use only 1 interface or i need to use both?
Thanks
MAhesh
Solved! Go to Solution.
06-28-2012 11:48 AM
Radio 0 is the 2.4GHz, and Radio 1 is the 5GHz.
you can configure only one if you want, or you can have the same SSID on both. you could even configure one SSID on R0, and a different one on R1 if you want to.
Any of the AP configuration guides, or walk throughs should work well to get you up and running.
http://www.cisco.com/en/US/docs/wireless/access_point/12.3_7_JA/configuration/guide/s37ssid.html
HTH,
Steve
-----------------------------------------
Please remember to rate useful posts, and mark questions as answered
06-28-2012 11:48 AM
Radio 0 is the 2.4GHz, and Radio 1 is the 5GHz.
you can configure only one if you want, or you can have the same SSID on both. you could even configure one SSID on R0, and a different one on R1 if you want to.
Any of the AP configuration guides, or walk throughs should work well to get you up and running.
http://www.cisco.com/en/US/docs/wireless/access_point/12.3_7_JA/configuration/guide/s37ssid.html
HTH,
Steve
-----------------------------------------
Please remember to rate useful posts, and mark questions as answered
06-30-2012 09:34 PM
Hi Stephen,
Many thanks i am new to wi fi still lot to learn from this forum.
Mahesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide