cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
858
Views
5
Helpful
2
Replies

1815i

arun1290
Community Member

Iam using 1815I AP with mobility Express 8.10.151.0.

clients gets refreshed every 10-20 minutes .Most of the clients get reconnects automatically within few seconds.But few get diconnected.

Earlier i used mobility express 8.5.151.0.In no client refreshing thing.There is no issue while using that version.

Is there a soution to stop client refreshing ?

Pls help.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Replies 2

Mark Elsen
Hall of Fame
Hall of Fame

 

 - You can have a checkup  of the mobility express controller configuration with : https://cway.cisco.com/tools/WirelessAnalyzer/ 
, clients may have outdated drivers (make sure they are up to date) . You can also do client debugging on the controller , these can be analyzed with : https://cway.cisco.com/tools/WirelessDebugAnalyzer/

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

Rich R
VIP
VIP

Suggest update to 8.10.183.0 https://software.cisco.com/download/home/286306794/type/286289839/release/8.10.183.0
TAC recommended https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200046-tac-recommended-aireos.html#anc12 still saying 8.10.181.0 but they just haven't updated it yet although 8.10.181.0 and 8.10.182.0 have been deferred.

------------------------------
Please click Helpful if this post helped you and Accept as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
Review Cisco Networking for a $25 gift card