08-31-2007 05:16 AM - edited 07-03-2021 02:34 PM
I have (2) buildings connected with 1300 bridges. I have routers behind both bridges peering with EIGRP. Everything works fine when setting it up and testing. When we go live, and have the users go over the wireless link, after about 15 minutes the bridges will seize up and stop transmitting. Anyone ever have something like this happen??
09-05-2007 09:10 AM
Yep - we've had the same thing...
Played around for weeks and never really found the problem.
I'm thinking of trying some Meraki mesh units.
Howard
09-05-2007 09:58 AM
It looks like other people have seen this as well, but no cures. We have been seeing the message ?deauthenticating station" on the root bridge right before the connection drops. We took off all security, and it still behaves this way. I have a TAC case open but they have provided zero help as of yet.
09-23-2007 12:11 PM
Hi all, I'm experiencing the same issue with two c1310 bridges with 12.4.3g-JA1(ED) IOS on it. Please come back if TAC provides something usefull!!
09-23-2007 06:50 PM
Is there clear LOS between the buildings? What is the signal strength you are getting between the bridges?
09-23-2007 07:00 PM
We have a Cisco yagi directional antennae on the source building and are going about 200 feet.
I did clear some branches out of one small tree that was somewhat in the way, and that helped, but radio strength hasn't been the problem in our case.
Our problem is the far end unit just randomly shuts down the radio interface.
We don't have smartnet on those units, so I'm on my own...
Howard
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide