03-25-2019 06:52 AM - edited 07-05-2021 10:07 AM
Hello,
I have a foreign controller anchored back to a DMZ WLC. Multiple Guest SSIDs use this EOIP/Anchor.
QOS on the WAN routers between the Foreign/Anchor WLC is matching on the EOIP tunnel endpoints, using this as the matching criteria for any QOS policy. Obviously this means for QOS (at router level) I cannot be more specific about different subnets etc.. as the router only sees the EOIP source and destination.
Is there a way I can build a 2nd separate EOIP tunnel between these 2 controllers using different addresses and then anchor a single specific SSID to this secondary EOIP tunnel. The thinking is that I can the apply a new QOS policy on the WAN routers matching the secondary EOIP tunnel addresses which in turn would apply to the single SSID being anchored back.
I know I can do QOS on the WLC at SSID / AP level but this is not an option in this case.
Does an EOIP tunnel have to be to/from the management address only or can I create a new interface solely for a secondary EOIP tunnel?
Hopefully that makes sense and I a clear on what I am looking to achieve.
Thanks
03-25-2019 07:04 AM
Yes, Mobility anchor configuration is based on Management IP and the MAC of the WLC.
Better Make the QoS for the client Subnet for out bound traffic
03-25-2019 08:35 AM
I can't base the QOS on the client subnet as all the routers see is the EOIP tunnel endpoints (management IPs of each WLC). This is why I am asking the question. Are you meaning apply QOS at WLC level?
03-25-2019 09:17 AM - edited 03-25-2019 09:17 AM
Are you planning to have a QoS btw Foreign and Anchor ?
03-25-2019 09:21 AM
I would be looking to have QOS in both directions. "In and Out"
03-25-2019 09:45 AM
Ref the QoS on WLC for the functionality of QoS on WLC.
I would like to say put QoS for Foreign and Anchor IP traffic and Client Public NAT IP (on internet router). Hope this will help.
03-25-2019 06:21 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide