10-03-2006 11:20 AM - edited 07-04-2021 01:12 PM
2006 controller fails to boot, as follows:
Cisco AireOS Version 3.2.150.10
Initializing OS Services: Failed to open /mnt/application/eeprom.dat.
Cisco Crash Handler
This build was configured to copy this crash information to
a file called: "/mnt/application/mwar_dump1.crash"
I've not been able to find docs on this topic. Any help is appreciated! thanks,
Steve
10-09-2006 08:52 AM
The issue that you are observing in the WLC is indicating that the device is broken (unable to read the input from the EEPROM) and it needs to be replaced.
10-09-2006 12:16 PM
Hi
See this URL:
http://www.cisco.com/en/US/customer/products/ps6308/products_field_notice09186a00807516b4.shtml
Might not be the same root cause, but it seems if that eeprom file is lost or corrupted your WLC needs to go back to Cisco...
Regards
Aaron
Please rate helpful posts...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide