05-21-2014 03:43 AM - edited 07-05-2021 12:52 AM
Hi,
We're trying add several 2600 APs in a WLC 5508 (version 7.6.100) that is already serving 32 APs ( mostly 1131AG and 1142N).
The 2600 APs register correctly but the radio interface are in radio interface reset state:
Boot Version ................................... 12.4.25.0
Mini IOS Version ................................ 7.5.1.73
Stats Reporting Period .......................... 180
Stats Collection Mode ........................... normal
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Low Power
Number Of Slots.................................. 2
AP Model......................................... AIR-CAP2602I-E-K9
AP Image......................................... C2600-K9W8-M
IOS Version...................................... 15.2(4)JB3$
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1809J2S0
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 00 h 23 m 44 s
AP LWAPP Up Time................................. 0 days, 00 h 22 m 02 s
Join Date and Time............................... Wed May 21 08:37:46 2014
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. DOWN
Operation State Down Cause................... Radio interface reset.
Operation State Down Code.................... RADIO_RC_IDB_RESET
Radio Role .................................. ACCESS
Radio Mode .................................. Local
CellId ...................................... 0
...
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211n-5
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. DOWN
Operation State Down Cause................... Radio interface reset.
Operation State Down Code.................... RADIO_RC_IDB_RESET
Radio Role .................................. ACCESS
Radio Mode .................................. Local
CellId ...................................... 0
Any thoughts on what is going on with the radio interfaces?
Does anyone knows the meaning of RADIO_RC_IDB_RESET ?
Solved! Go to Solution.
05-21-2014 03:50 PM
Power Type/Mode.................................. PoE/Low Power
This is probably the reason why your AP's radio isn't working.
05-21-2014 08:21 AM
Can you post the following output:
1. sh version from AP
2. sh sysinfo from WLC
Regards
05-21-2014 03:50 PM
Power Type/Mode.................................. PoE/Low Power
This is probably the reason why your AP's radio isn't working.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide