02-07-2020 03:34 AM - edited 07-05-2021 11:40 AM
Hello Experts,
I having issue with one AP, whcih is not joing to WLC (version 8.5.151.0), rest more then 30 APs are joined.
Here are logs from AP:
Discovery response from MWAR ''running version 0.0.0.0 is rejected.
Failed to decode discovery response.
CAPWAP SM handler: Failed to process message type 2 state 2.
Failed to handle capwap control message from controller - status 4
Thanks in advance
02-07-2020 03:37 AM
Paste the output of these commands:
sh syinfo from WLC
show time form WLC
Is AP getting enough power ? (either via PoE or power injector)
Regards
Dont forget to rate helpful posts
02-07-2020 03:48 AM
Here are the output:
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.5.151.0
RTOS Version..................................... 8.5.151.0
Bootloader Version............................... 8.3.15.177
Emergency Image Version.......................... 8.3.143.0
OUI File Last Update Time........................ Sun Sep 07 10:44:07 IST 2014
Build Type....................................... DATA + WPS
System Name...................................... WLC1
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.2170
Redundancy Mode.................................. SSO
IP Address....................................... 192.168.80.1
IPv6 Address..................................... ::
System Up Time................................... 0 days 13 hrs 35 mins 43 secs
System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin, Rome, Vienna
--More-- or (q)uit
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... FR - France
Operating Environment............................ Commercial (10 to 35 C)
Internal Temp Alarm Limits....................... 10 to 38 C
Internal Temperature............................. +23 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 5
Number of Active Clients......................... 64
OUI Classification Failure Count................. 294
Memory Current Usage............................. 9
Memory Average Usage............................. 9
CPU Current Usage................................ 0
CPU Average Usage................................ 0
Flash Type....................................... Compact Flash Card
Flash Size....................................... 1073741824
Burned-in MAC Address............................
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 1500
System Nas-Id....................................
WLC MIC Certificate Types........................ SHA1/SHA2
Licensing Type................................... RTU
(WLC1) >show time
Time............................................. Fri Feb 7 12:45:18 2020
Thanks
02-07-2020 03:52 AM
Country code and software version are ok.
How about the power ? Is it getting enough power or ?
02-07-2020 03:56 AM
We are using PoE and AP is getting full power (26.1W )
02-07-2020 03:59 AM
Ok then it must be buggy CSCvf71074/CSCvh85082.
Raise a TAC case and ask about the solution or RMAed it.
Regards
Dont forget to rate helpful posts
02-07-2020 04:07 AM
Ok i will check with my supplier. Thanks
02-07-2020 04:41 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide