350 Wireless Bridge firmware

[kodanig]

I've upgraded the firmware on a few 350 wireless bridges from 12.03 to 12.04 via the web interface using the image file "BR350v1204.img". After the reboot, the web interface shows the version 12.04 in the upper left corner of the web page. When I use the "Distribute Firmware to other Cisco Devices" the "Current Version of System Firmware:" appears as 12.03. After I distribute the firmware to other 350's, the same symtons appear...12.04 listed in the browser, 12.03 under system firmware. Am I missing a step here and actually haven't upgraded the firmware to 12.04?

Thanks

Gary

[melisei]

Hi there,

Have you tried to default the unit?

Here is the info on how to do it. The document refers to some other things but you have the instructions on how to default the 350.

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml

ME

[kodanig]

Hi, I did reset it to factory defaults, after the upgrade, but it had no effect. Since the web interface and the top of the home Summary Status page (in the command-line interface) are both showing 12.04, I'm pretty sure it's been upgraded but for some reason, system info (web-interface) still shows 12.03. I did find some additional information in the release notes noting that an invalid console message appears "Inflating EnterpriseAP sys 12.03..." appears and it states that this message is invalid and should be ignored.

[melisei]

Hi there,

I checked mine and... surprize... same "problem".

I think is just a bug in the software. I wouldn't worry too much, my 350s work fine.

Cheers,

ME